Question

Notify Me Bookmark

Blocks A and B are connected by rope 1 and are pulled at constant speed across a rough surface by rope 2, which is attached to block B, as shown. Compare the magnitude of the tensions in ropes 1 and 2.

Blocks A and B are connected by rope 1 and are pulled at constant speed across a rough surface by rope 2, which is attached to block B, as shown. Compare the magnitude of the tensions in ropes 1 and 2.

Image text
Blocks A and B are connected by rope 1 and are pulled at constant speed across a rough surface by rope 2, which is attached to block B, as shown. Compare the magnitude of the tensions in ropes 1 and 2 .

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Three blocks with masses, m1 = 1 kg, m2 = 2 kg, and m3 = 4.0 kg, are pulled to the right across a horizontal frictionless surface by a constant force, F = 48 N, that acts on the large block as shown in the figure. Two of the blocks, m1 and m3, are connected by an ideal rope while the smallest block, m2, is sitting directly in front of m1 as shown. Take right as the positive direction. Version One. (a) Find the acceleration of the system? m/s2 (b) Determine the magnitude of the tension in the rope between m1 and m3. N (c) What is the magnitude of the normal (contact) force between m1 and m2 ? N Version Two. What if block m2 was placed on top of block m1 instead of in front of it? (a) What would be the acceleration of the system and tension in the rope if m2 and m1 stuck together? a = m/s2 T = N (b) What if the blocks were made of ice so that m2 and m1 didn't stick together? At what rate would each block accelerate? a1 = m/s2 a2 = m/s2 a3 = m/s2 a3 = What would be the tension in the rope?
Solution
0 0

Blocks A and B, each with a mass of 1.0 kg, are hung from the ceiling of an elevator by ropes 1 and 2. What is the force exerted by rope 1 on block A when the elevator is stationary? 22 N. 12 N. 10 N. 20 N. 2 N.
Solution
0 0

Consider blocks m1 and m2, with m1 held at rest on a horizontal table (where the coefficient of kinetic friction between m1 and the table is μk ), and m2 held in place by a movable, massless, frictionless pulley to which it is attached via a massless cable. As shown in Figure 7, the rope attaching m1 is run across a massless, frictionless pulley affixed to the table, which is then threaded through the movable pulley to then attach to the ceiling. The system is released, and the blocks are observed to move out of rest. Consider analyzing the problem from the point at which the system is released from rest up to the point when m1 has displaced by an amount ℓ. Figure 7: Block 1 is held in place on a horizontal table (with friction) with an attached, massless rope running from it to an affixed pulley, and then threading through a movable pulley to then attach to the ceiling. The movable pulley is attached to a hanging Block 2 via a massless cable. The system is released and is seen to displace, with work considerations to be investigated up to the point when Block 1 displaces by an amount ℓ. (a) Determine the work done by each individual force acting on each individual block for the considered displacement. (b) Determine the speed of each block for the considered displacement.
Solution
0 0