Question

Notify Me Bookmark

Charges of +2.30 nC and −1.00 nC are located at opposite corners, A and C, respectively, of a square which is p = 7.10 m on a side. What is the electric potential at a third corner, B, of the square (where there is no charge)? V

Charges of +2.30 nC and −1.00 nC are located at opposite corners, A and C, respectively, of a square which is p = 7.10 m on a side. What is the electric potential at a third corner, B, of the square (where there is no charge)? V

Image text
Charges of + 2.30 n C and − 1.00 n C are located at opposite corners, A and C , respectively, of a square which is p = 7.10 m on a side. What is the electric potential at a third corner, B , of the square (where there is no charge)? ◻ V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Charges Q1 = 7.2 C and Q2 = −8.5 C are at adjacent corners of a square of side 0.5 m. There is no charge at point A, which is the midpoint along its side. The potential is chosen so that V approaches O very far from the charges. The electric potential energy in this system is ____ ×1011 J.
Solution
0 0

In the figure below, each charged particle is located at one of the four vertices of a square with side length = a. In the figure, A = 3, B = 4, and C = 3, and q > 0. (i) (a) What is the expression for the magnitude of the electric field in the upper right corner of the square (at the location of q )? (Use the following as necessary: q, a, and ke⋅) E = Give the direction angle (in degrees counterclockwise from the +x-axis) of the electric field at this location. (counterclockwise from the +x-axis) (b) Determine the expression for the total electric force exerted on the charge q. (Enter the magnitude. Use the following as necessary: q, a, and ke. ) F = Give the direction angle (in degrees counterclockwise from the +x-axis) of the electric force on q. ∘ (counterclockwise from the +x-axis) (c) What If? How would the answers to parts (a) and (b) change if each of the four charges were negative with the same magnitude? Select all that apply. The force would be the same magnitude but opposite direction as the force in part (b). The electric field would be the same magnitude and direction as the field in part (a). The force would be the same magnitude and direction as the force in part (b). The electric field would be the same magnitude but opposite direction as the field in part (a).
Solution
0 0

In this question, you are asked to find the effective transconductance (Gm) and the resistance into the drain (Rx) of a common-source amplifier with source degeneration. Based on the results, the voltage gain of a common-source amplifier with source degeneration will be evaluated a) The figures shown below are a circuit to find the effective transconductance (G) of the NMOSEFT with source degeneration (left) and its corresponding small-signal circuit (right). It is noted that the output is shorted to VDD (ac grounded) since the definition of effective transconductance is the ratio between the short-circuit output current and the input signal voltage. Prove that Gm is given by Gm = id/vin = gm/1+gmRs In this calculation, the current passing through ro can be neglected since, in general, ro is very large when the NMOSFET operates in saturation region and so this current is very small. Thus, the indication of id is the current of the voltage-controlled current source (gmvgs) only. b) The figure shown below is the method to evaluate the resistance looking into the drain (i.e. Rx) of a source-degenerated NMOSFET. The circuit is shown on the left while the equivalent small-signal modeling is shown on the right. It is noted that the bias condition (VBiAS) is set so that the values of gm and ro, can be defined. Moreover, there is no input signal (i.e. Vin = 0) since we would like to see the value of Rx which is due to the circuit only but not due to the external effect. Based on the above small-signal model, prove that RX = ro(1 + gmRS) The complete common-source amplifier with source degeneration is shown below. c) The complete common-source amplifier with source degeneration is shown below. Prove that the voltage gain of this amplifier is given by v. Vin Explain the reason(s) why the voltage gain is negative. What is the physical meaning of negative voltage gain?

In this question, you are asked to find the effective transconductance (Gm) and the resistance into the drain (Rx) of a common-source amplifier with source degeneration. Based on the results, the voltage gain of a common-source amplifier with source degeneration will be evaluated a) The figures shown below are a circuit to find the effective transconductance (G) of the NMOSEFT with source degeneration (left) and its corresponding small-signal circuit (right). It is noted that the output is shorted to VDD (ac grounded) since the definition of effective transconductance is the ratio between the short-circuit output current and the input signal voltage. Prove that Gm is given by Gm = id/vin = gm/1+gmRs In this calculation, the current passing through ro can be neglected since, in general, ro is very large when the NMOSFET operates in saturation region and so this current is very small. Thus, the indication of id is the current of the voltage-controlled current source (gmvgs) only. b) The figure shown below is the method to evaluate the resistance looking into the drain (i.e. Rx) of a source-degenerated NMOSFET. The circuit is shown on the left while the equivalent small-signal modeling is shown on the right. It is noted that the bias condition (VBiAS) is set so that the values of gm and ro, can be defined. Moreover, there is no input signal (i.e. Vin = 0) since we would like to see the value of Rx which is due to the circuit only but not due to the external effect. Based on the above small-signal model, prove that RX = ro(1 + gmRS) The complete common-source amplifier with source degeneration is shown below. c) The complete common-source amplifier with source degeneration is shown below. Prove that the voltage gain of this amplifier is given by v. Vin Explain the reason(s) why the voltage gain is negative. What is the physical meaning of negative voltage gain?

Solution
1 0