Question

Notify Me Bookmark

Each capacitor in the combination shown in the figure below (C = 17.0 μF) has a breakdown voltage of 16.0 V. What is the breakdown voltage of the combination? V

Each capacitor in the combination shown in the figure below (C = 17.0 μF) has a breakdown voltage of 16.0 V. What is the breakdown voltage of the combination? V

Image text
Each capacitor in the combination shown in the figure below ( C = 17.0 μ F ) has a breakdown voltage of 16.0 V . What is the breakdown voltage of the combination? ◻ V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Sometimes it is useful to have a logic circuit which has a two different thresholds for turning on and off the circuit depending on the state of the output (and in turn the input). This circuit goes by the name Schmitt trigger and an NMOS version is shown in figure 4. Determine for what voltage level at A will the circuit output a logic high when A swings from 0 V to VDD. What is the voltage at A for which the circuit will output a logic low if A swings from VDD to 0 V? Assume the ON resistance of all the N-MOSFETs are Ron and the threshold voltage of the MOSFETs are VTN. Figure 4: Schmitt Inverter
Solution
0 0

In the circuit shown in the figure, the inductor has inductance L = 4.00 H and negligible internal resistance. The battery has a voltage of Vb = 11.0 V and is connected in series to a resistor of resistance R1 = 15.0 Ω. A second resistor has a resistance of R2 = 145 Ω. The switch S has been closed for a long time. At time t = 0, the switch is opened. What is the current Ib,0 in the battery, the current I2,0 in resistor R2, and the current IL,0 in the inductor at t = 0. Ib,0 = A I2,0 = A I2,∞ = A Ib,∞ = A IL,∞ = A
Solution
0 0

Consider the shown circuit and assume R = 2 kohm and: D1 and D2 have V = 0.7 V and a very large breakdown voltage DZ1, DZ2 are Zener diodes with V = 0.7 V and breakdown voltage of 6 V Hand Calculation a) Calculate Vo at: vI = -8 V vI = -5 V vI = 4 V vI = 9 V b) Fill in the table below, where the state of the diode could be: Forward (F), Reverse (R) or Breakdown (BR) c) Find the range of voltages for vI that make D1 forward biased and DZ1 in breakdown d) Find the range of voltages for vI that make D2 forward biased and DZ2 in breakdown e) Find the range of voltages for vI that make all diodes reverse biased f) Plot vI (on the x-axis) with vO (on the y-axis) for the range ?10 < vI < 10 g) Assume that vI(t) = 10sin(6pit)V, plot vO(t). Simulation Draw the circuit on LTSpice and note that: the model for D1, D2 is constant drop with Vfwd = 0.7 the model for DZ1, DZ2 is constant drop with Vfwd = 0.7 and a breakdown voltage Vrev = 6 a) Perform DC operating point simulation to verify the results in pan (a) in the hand calculations b) Perform DC sweep simulation to verify the plot in part (f) in the hand calculations c) Choose VI to be sinusoidal with VI(t) = 10sin(6pit) V, use transient simulation and plot 3 cycles of Vo and verify the plot in part (g) in the hand calculations

Solution
1 0