Question

Notify Me Bookmark

Given that circuit C2 has a current-voltage response of I = 10∗V+(−100), I in mA, V in volts, what is the maximum voltage VB for which the voltage source is not supplying power when the voltage source is connected to circuit C2? maximum VS = number (rtol = 0.01, atol = 1 e−05) V

Given that circuit C2 has a current-voltage response of I = 10∗V+(−100), I in mA, V in volts, what is the maximum voltage VB for which the voltage source is not supplying power when the voltage source is connected to circuit C2? maximum VS = number (rtol = 0.01, atol = 1 e−05) V

Image text
Given that circuit C 2 has a current-voltage response of I = 10 ∗ V + ( − 100 ) , I in m A , V in volts, what is the maximum voltage V B for which the voltage source is not supplying power when the voltage source is connected to circuit C 2 ? maximum V S = number (rtol=0.01, atol = 1 e − 05 ) ◻ V

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

You are given that VTH = 1 V, VGS = 3 V, VDD = 18 V, and RD = 225 Ω. Use the ID−VDS characteristics to find the transistor parameter k and the value of ID that results when operating at VDS = 9 V. Note: You may want to use equations for improved accuracy. ID = number (rtol = 0.01, atol = 1 e−05) mA
Solution
0 0

In the circuit shown below the voltage, VCC = 10 V, VBB = 2.7 V, RC = 1 kΩ, RB = 100 kΩ. Assume VD(on) = 0.7 V, VBE(on) = 0.7 V, VCE(sat) = 0.2 V, β = 100. Part a. Find current ID1 with VBB = 2.7 V. ID1 = number mA Part b. Now assume VCC = 13.9 V. Find the minimum value of VBB which will put transistor Q1 in saturation. VBB = number (rtol = 0.01, atol = 1 e−05) V
Solution
0 0

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.

Figure P7.33 shows a discrete-circuit amplifier. The input signal vsig is coupled to the gate through a very large capacitor (shown as infinite). The transistor source is connected to ground at signal frequencies via a very large capacitor (shown as infinite). The output voltage signal that develops at the drain is coupled to a load resistance via a very large capacitor (shown as infinite). All capacitors behave as short circuits for signals and as open circuits for dc. (a) If the transistor has Vt = 1 V, and kn = 4 mA/V2 , verify that the bias circuit establishes VGS = 1.5 V, ID = 0.5 mA, and VD = +7.0 V. That is, assume these values, and verify that they are consistent with the values of the circuit components and the device parameters. (b) Find gm and ro if VA = 100 V. (c) Draw a complete small-signal equivalent circuit for the amplifier, assuming all capacitors behave as short circuits at signal frequencies. (d) Find Rin, vgs/vsig, vo/vgs, and vo/vsig.
Solution
3 0