Question

Notify Me Bookmark

If a = 2 ft and b = 4 ft, determine the minimum force P necessary to move the 100 lb drum. Consider both slip and tip. Take friction to be equal to 0.5 at the ground. 50.0 44.8 41.8 53.0

If a = 2 ft and b = 4 ft, determine the minimum force P necessary to move the 100 lb drum. Consider both slip and tip. Take friction to be equal to 0.5 at the ground. 50.0 44.8 41.8 53.0

Image text
If a = 2 f t and b = 4 f t , determine the minimum force P necessary to move the 100 l b drum. Consider both slip and tip. Take friction to be equal to 0.5 at the ground. 50.0 44.8 41 : 8 53.0

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

4-61. The drum has a weight of 500 N and rests on the floor for which the coefficient of static friction is μs = 0.5. If a = 0.9 m and b = 1.2 m, determine the smallest magnitude of the force P that will cause impending motion of the drum. Probs. 4-60/61
Solution
0 0

A bucket crane consists of a uniform boom of mass M = 201 kg and length L = 59.69 ft that pivots at a point on a truck bed. The boom supports an elevated bucket with a worker inside at the other end of the boom, as shown in the figure. Model the bucket and the worker together as a point mass of weight 203 Ib, located at the end point of the boom. Suppose that when the boom makes an angle of 66.3∘ with the horizontal truck bed, the bucket crane suddenly loses power, causing the bucket and boom to rotate freely toward the ground. Take the rotation axis to be at the point where the boom pivots on the truck bed. Use R = 9.81 m/s2 for the acceleration due to gravity. For unit conversions, assume that 1 m = 3.28 ft and 1 Ib = 4.45 N. Find the magnitude of the angular acceleration a of the system just after the crane loses power. Express your answer Io at least two decimal places. a = rad s2
Solution
0 0

Charge sharing is an important problem in dynamic circuits. Switching exposes a fixed amount of charge to a different capacitive environment. This results in node voltage change. After pre-charge stage, the output node voltage of the dynamic logic circuit in Figure 1 will be equal to VDD. During the evaluate phase, assume A = 1 and B=0. Output node will not connect to ground but the total charge on the output node (Q = C.V) will be shared by parasitic capacitance (C1) and the load capacitance (CL). So that the output voltage will drop and be equal to M1 source voltage. a. The circuit is Figure 1 is pre-charged with VDD = 3V. During evaluation stage, M1 turns on and M2 is off (A=1 and B=0). CL = 250fF, C1 = 125fF and Vt0,n=0.55V. Calculate the final voltage after charge sharing. Is M1 still conducting at this voltage? b. Repeat question a for C1 = 40fF. Calculate the final voltage after charge sharing. Is M1 still conducting at this voltage? If not, what is the value of the output voltage at this scenario? c. With A = 1 and B = 0, the output of the circuit in Fig 1 should be logic high. However, you have seen that logic high does not mean VDD for this example. Output voltage depends on the parasitic capacitance at the source node of M2. For a dynamic 2 input NAND gate, what is the maximum value that the Figure 1 output voltage can reach when A= 1 and B = 0?

Solution
0 0