Question

Notify Me Bookmark

In the figure, a small 0.458 kg block slides down a frictionless surface through height h = 1.22 m and then sticks to a uniform vertical rod of mass M = 0.916 kg and length d = 2.28 m. The rod pivots about point O through angle θ before momentarily stopping. Find θ. Number Units

In the figure, a small 0.458 kg block slides down a frictionless surface through height h = 1.22 m and then sticks to a uniform vertical rod of mass M = 0.916 kg and length d = 2.28 m. The rod pivots about point O through angle θ before momentarily stopping. Find θ. Number Units

Image text
In the figure, a small 0.458 kg block slides down a frictionless surface through height h = 1.22 m and then sticks to a uniform vertical rod of mass M = 0.916 k g and length d = 2.28 m . The rod pivots about point O through angle θ before momentarily stopping. Find θ .
Number i Units ◻

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Starting from rest, a small block of mass m = 0.25 kg slides down an incline from a height h = 1.2 m. As it slides down, the block experiences a force of kinetic friction of constant magnitude fk = 2.1 N only over a distance L = 0.2 m, as shown in the figure. The incline is frictionless everywhere else. After reaching the bottom of the incline, the block strikes a larger block of mass M = 1.8 kg that is attached to a spring of spring constant k = 6.5 N/m. The large block was originally at rest. The blocks stick together upon impact and travel together on the frictionless horizontal surface. Assume that both blocks are subject to the regular force of gravity (g = 9.80665 m/s2). (a) Determine the speed of the small block right before it collides with the larger block. Answer: m/s (b) Determine the speed of the combination of the two blocks immediately after the collision. Answer: m/s (c) Determine the compression of the spring when the combination of the two blocks comes to rest. Answer: m
Solution
0 0

Problem #5: Collision A pendulum consists of a mass M = 5m (treat as a point-particle) hanging at the bottom end of a rod of mass 2m and length L, which has a frictionless pivot at its top end. A mass m, moving with velocity v, impacts M and becomes embedded. What is the smallest value of v sufficient to cause the pendulum with embedded mass m to swing clear over the top of its arc? Give answer in terms of g and L. (The moment of inertia of a rod of mass m and length L about the end is Irod-end = (1/3)mL2). ν > 560gL 3
Solution
0 0

A crane is made from a long, horizontal arm with mass m = 2.41×104 kg and length L = 52.0 m. The crane arm is supported by a vertical tower positioned halfway along the arm as shown in the figure below. The arm is free to rotate horizontally about the axis of the tower. The moment of inertia of a uniform rod with mass m and length L pivoted about its centre is given by Irod = 112 mL2. L Part 1) The crane lifts a mass M = 1070 kg at the end of the arm on one side of the tower. To keep the crane balanced, a counterweight of mass Mc = 5420 kg is placed on the arm on the opposite side of the tower to mass M. How far from the tower should the counterweight be placed such that the centre of mass for the arm and both masses is directly over the tower? x = m Part 2) What is the moment of inertia of the crane about the axis of the tower? Include the contributions of the horizontal arm, the mass and the counterweight. I = kg m2 Part 3) A net torque of magnitude τ = 6660 Nm is applied to the crane. If the crane starts at rest, what is its angular velocity after t = 30.0 s ? ω = rad s−1
Solution
0 0