Question

Notify Me Bookmark

The 500 kg concrete culvert with relatively small thickness and mean radius of 0.5 m, resides on a truck, as shown in Figure 2. If the truck has an initial acceleration of 3 m/s2 and is starting from rest, determine the initial culvert's angular acceleration and the minimum coefficient of friction required such that the culvert does not experience any slipping. (25 marks) Figure 2

The 500 kg concrete culvert with relatively small thickness and mean radius of 0.5 m, resides on a truck, as shown in Figure 2. If the truck has an initial acceleration of 3 m/s2 and is starting from rest, determine the initial culvert's angular acceleration and the minimum coefficient of friction required such that the culvert does not experience any slipping. (25 marks) Figure 2

Image text
The 500 k g concrete culvert with relatively small thickness and mean radius of 0.5 m , resides on a truck, as shown in Figure 2. If the truck has an initial acceleration of 3 m / s 2 and is starting from rest, determine the initial culvert's angular acceleration and the minimum coefficient of friction required such that the culvert does not experience any slipping.| (25 marks) Figure 2

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The 500 kg concrete culvert with relatively small thickness and mean radius of 0.5 m, resides on a truck, as shown in Figure 2. If the truck has an initial acceleration of 3 m/s2 and is starting from rest, determine the initial culvert's angular acceleration and the minimum coefficient of friction required such that the culvert does not experience any slipping. (25 marks) Figure 2
Solution
0 0

A solid disk rolls at an initial linear velocity of 2.40 m/s until it eventually stops, as shown in the diagram below: a. (4 Points) Draw the angular velocity vector (ω→) and the angular acceleration vector (α→) for that motion. b. (4 Points) Based on that information, draw the rigid free-body diagram. c. (9 Points) If the disk has a mass of 1.20 kg and a radius of 0.15 meters, and the coefficient of friction is μ = 0.65, how far does the disk travel from its starting position, in meters? (Note: Idisk = 12 MR2)
Solution
0 0

The truck with a ladder plotted in Fig. 5 starts from rest (and accelerates to the left) with an acceleration of 7 m/s2. The ladder of mass m = 10 kg, which is the rigid body of interest in this problem, can be modeled as a uniform slender rod that is hinged at point A and supported at point B. As a consequence, the center of mass G of the ladder is located at the midpoint of the rod. Any friction in this problem is supposed to be small enough to be neglected. a) Determine the minimum linear acceleration amin of the truck such that the ladder loses contact at point B, i. e. the normal force NB at B vanishes, and starts to rotate about point A. Do so by determining the sum of the moments about point A, and verify that for the given acceleration of the truck, the ladder will in fact lose contact at point B. b) Determine the mass moment of inertia I¯ of the ladder associated with its center of mass G. c) Use the result found in Part b) and employ the concept of relative acceleration expressed in terms of a normal-tangential coordinate system to determine the initial angular acceleration vector α of the ladder. Figure 5: A truck with a ladder accelerating from rest to the left and measurements.
Solution
0 0