Question

Notify Me Bookmark

The drawing shows a baggage carousel at an airport. Your suitcase has not slid all the way down the slope and is going around at a constant speed on a circle ((r = 11.0 m) as the carousel turns. The coefficient of static friction between the suitcase and the carousel is 0.940, and the angle θ in the drawing is 11.3∘. How much time is required for your suitcase to go around once? Assumme that the static friction between the suitcase and the carousel is at its maximum. Number Units

The drawing shows a baggage carousel at an airport. Your suitcase has not slid all the way down the slope and is going around at a constant speed on a circle ((r = 11.0 m) as the carousel turns. The coefficient of static friction between the suitcase and the carousel is 0.940, and the angle θ in the drawing is 11.3∘. How much time is required for your suitcase to go around once? Assumme that the static friction between the suitcase and the carousel is at its maximum. Number Units

Image text
The drawing shows a baggage carousel at an airport. Your suitcase has not slid all the way down the slope and is going around at a constant speed on a circle ( ( r = 11.0 m ) as the carousel turns. The coefficient of static friction between the suitcase and the carousel is 0.940 , and the angle θ in the drawing is 11.3 ∘ . How much time is required for your suitcase to go around once? Assumme that the static friction between the suitcase and the carousel is at its maximum.
Number i Units ◻

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A racetrack curve has radius 120.0 m and is banked at an angle of 18⋅0∘. The coefficient of static friction between the tires and the roadway is 0.300 . A race car with mass 900 kg rounds the curve with the minimum speed needed to not slide down the banking. Part A As the car rounds the curve, what is the normal force exerted on it by the road? Express your answer with the appropriate units. n = Part B What is the car's speed? Express your answer with the appropriate units. v =

Solution
0 0

Engineering a highway curve. If a car goes through a curve too fast, the car tends to slide out of the curve. For a banked curve with friction, a frictional force acts on a fast car to oppose the tendency to slide out of the curve; the force is directed down the bank (in the direction water would drain). Consider a circular curve of radius R = 220 m and bank angle θ, where the coefficient of static friction between tires and pavement is μs. A car (without negative lift) is driven around the curve as shown in the figure below. Find an expression for the car speed vmax that puts the car on the verge of sliding out, in terms of R, θ, and μs. Evaluate vmax for a bank angle of θ = 11∘ and for (a) μs = 0.77 (dry pavement) and (b) μs = 0.047 (wet or icy pavement). (Now you can see why accidents occur in highway curves when icy conditions are not obvious to drivers, who tend to drive at normal speeds. ) (a) Number Units (b) Number Units
Solution
0 0

A loaded penguin sled weighing 61.0 N rests on a plane inclined at angle θ = 25.0∘ to the horizontal (see the figure). Between the sled and the plane, the coefficient of static friction is 0.300, and the coefficient of kinetic friction is 0.110. (a) What is the minimum magnitude of the force F→, parallel to the plane, that will prevent the sled from slipping down the plane? (b) What is the minimum magnitude F that will start the sled moving up the plane? (c) What value of F is required to move the sled up the plane at constant velocity? (a) Number Units (b) Number Units (c) Number Units
Solution
0 0