Question

Notify Me Bookmark

The large block shown is x = 20.0 cm wide, y = 21.0 cm long, and z = 27.00 cm high with a mass of 4.55 kg. This block is passing through air (density of air ρair = 1.43 kg/m3). Calculate the terminal velocity of the block if it is traveling downward with a drag coefficient of Γ = 0.832. See the hint panel for the drag force equation. terminal velocity: m/s

The large block shown is x = 20.0 cm wide, y = 21.0 cm long, and z = 27.00 cm high with a mass of 4.55 kg. This block is passing through air (density of air ρair = 1.43 kg/m3). Calculate the terminal velocity of the block if it is traveling downward with a drag coefficient of Γ = 0.832. See the hint panel for the drag force equation. terminal velocity: m/s

Image text
The large block shown is x = 20.0 cm wide, y = 21.0 cm long, and z = 27.00 cm high with a mass of 4.55 kg . This block is passing through air (density of air ρ air = 1.43 kg / m 3 ). Calculate the terminal velocity of the block if it is traveling downward with a drag coefficient of Γ = 0.832 . See the hint panel for the drag force equation. terminal velocity: ◻ m / s

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

The large block shown is x = 18.0 cm wide, y = 19.0 cm long, and z = 27.00 cm high with a mass of 2.55 kg. This block is passing through air (density of air ρair = 1.43 kg/m3). See the hint panel for the drag force equation. Calculate the terminal velocity vT of the block if it is traveling downward with a drag coefficient of Γ = 0.882. vT =m/s
Solution
0 0

A hanging weight, with a mass of m1 = 0.360 kg, is attached by a string to a block with mass m2 = 0.850 kg as shown in the figure below. The string goes over a pulley with a mass of M = 0.350 kg. The pulley can be modeled as a hollow cylinder with an inner radius of R1 = 0.0200 m, and an outer radius of R2 = 0.0300 m; the mass of the spokes is negligible. As the weight falls, the block slides on the table, and the coefficient of kinetic friction between the block and the table is μk = 0.250. At the instant shown, the block is moving with a velocity of vi = 0.820 m/s toward the pulley. Assume that the pulley is free to spin without friction, that the string does not stretch and does not slip on the pulley, and that the mass of the string is negligible. (a) Using energy methods, find the speed of the block (in m/s ) after it has moved a distance of 0.700 m away from the initial position shown. m/s (b) What is the angular speed of the pulley (in rad/s) after the block has moved this distance? rad/s

Solution
0 0

As shown in Figure 3(a), a wooden block B with mass mB = 2.4 kg on a rough inclined plane is connected to a massless spring ( k = 160 N/m ) by a massless cord passing over a pulley P of radius R = 0.25 m and mass Mp = 0.60 kg. The angle of the inclined plane is θ = 37∘ and the coefficients of static and kinetic frictions are μs = 0.35 and μk = 0.30 respectively. The frictional force at the axle of the pulley is negligible. The pulley can be regarded as a solid disk. (a) The system is at rest and in this case, block B is on the verge of sliding down. Figure 3(a) i. Indicate (with labeled arrows) the forces acting on the pulley and the block. ii. Calculate the tension in the string and the extension of the spring. (You can assume that the tensions in the cord on either side of the pulley P are the same for this part.) (b) As shown in Figure 3(b), another wooden block A of mass mA = 1.2 kg made of the same material as block B is released from rest. It slides down a distance l down the rough inclined plane and collides with block B. The two blocks stick together and move down the incline with a common velocity v = 0.80 m/s immediately after collision and the pulley rotates. The cord does not stretch and does not slip on the pulley. Figure 3(b) i. Determine the distance l. ii. Determine the acceleration of the two blocks at the moment they move down together and the pulley starts to rotate. iii. Determine how much further down the slope the two blocks move together after they collide before the two blocks come to a momentary rest.
Solution
0 0