Question

Notify Me Bookmark

The loop in the image is moving through the magnetic field, of strength 0.200 T, at a speed of 44.0 m/s. If the resistance in the loop is 1.00 Ω and the width of the wire is x = 4.00 cm, what is the magnitude and direction of the induced current? Magnitude: Direction: counterclockwise. clockwise.

The loop in the image is moving through the magnetic field, of strength 0.200 T, at a speed of 44.0 m/s. If the resistance in the loop is 1.00 Ω and the width of the wire is x = 4.00 cm, what is the magnitude and direction of the induced current? Magnitude: Direction: counterclockwise. clockwise.

Image text
The loop in the image is moving through the magnetic field, of strength 0.200 T , at a speed of 44.0 m / s . If the resistance in the loop is 1.00 Ω and the width of the wire is x = 4.00 c m , what is the magnitude and direction of the induced current?
Magnitude: ◻ ◻ Direction: counterclockwise. clockwise.

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

a. A conducting bar is bent into a U-shape as shown below, with a sliding conductor placed across it. The sliding conductor moves at a constant velocity v→ = 100 ms in the presence of a time-varying magnetic field, B→ = a^z0.05 sin⁡(1000πt) T. If d = 0.5 m, determine the total emf developed in the loop at t = 3.25 ms. In what direction would current be at this time? Answer: Vemf = +19.8 V, current is CCW b. A square loop of wire is 25 cm on each side and has a resistance of 125 Ω/m. The loop lies in the z = 0 plane with its corners at (0, 0, 0), (0.25, 0, 0), (0.25, 0.25, 0), and (0, 0.25, 0) at t = 0. The loop is moving with velocity vy = 50 m/s in a B-field given by B→ = a^z8 cos⁡(1.5×108t − 0.5x) μT. Determine a function of time which expresses the ohmic power being delivered to the loop and then evaluate the expression at t = 5.00145281 ms. Answer: 20.9 W

Solution
0 0

A device called a railgun uses the magnetic force on currents to launch projectiles at very high speeds. An idealized model of a railgun is illustrated in the following figure. A 1.2 volt power supply is connected to the two conducting rails. A segment of copper wire, in a region of uniform magnetic field, freely slides on the rails. The wire has a 0.85 mΩ resistance and a mass of 5.0 g. Ignoring the resistance of the rails, when the power supply is connected a) what is the current in the circuit? b) what are the magnitude and direction of the force on the wire? c) what will be the wire's speed after it has slid a distance of 1.0 mm?
Solution
0 0

The figure here shows a plot of potential energy U versus position x of a 0.852 kg particle that can travel only along an x axis. (Nonconservative forces are not involved.) Three values are UA = 15.0 J, UB = 35.0 J and UC = 45.0 J. The particle is released at x = 4.50 m with an initial speed of 7.89 m/s, headed in the negative x direction. (a) If the particle can reach x = 1.00 m, what is its speed there, and if it cannot, what is its turning point? What are the (b) magnitude and (c) direction of the force on the particle as it begins to move to the left of x = 4.00 m ? Suppose, instead, the particle is headed in the positive x direction when it is released at x = 4.50 m at speed 7.89 m/s. (d) If the particle can reach x = 7.00 m, what is its speed there, and if it cannot, what is its turning point? What are the (e) magnitude and (f) direction of the force on the particle as it begins to move to the right of x = 5.00 m?
Solution
0 0