Question

Notify Me Bookmark

Three 100 Ω resistors are connected as shown in the figure. The maximum power that can safely be delivered to any one resistor is 23.0 W. (a) What is the maximum potential difference that can be applied to the terminals a and b? V (b) For the voltage determined in part (a), what is the power delivered to each resistor? resistor on the left W resistor at the top of the loop W resistor at the bottom of the loop W (c) What is the total power delivered to the combination of resistors? W

Three 100 Ω resistors are connected as shown in the figure. The maximum power that can safely be delivered to any one resistor is 23.0 W. (a) What is the maximum potential difference that can be applied to the terminals a and b? V (b) For the voltage determined in part (a), what is the power delivered to each resistor? resistor on the left W resistor at the top of the loop W resistor at the bottom of the loop W (c) What is the total power delivered to the combination of resistors? W

Image text
Three 100 Ω resistors are connected as shown in the figure. The maximum power that can safely be delivered to any one resistor is 23.0 W . (a) What is the maximum potential difference that can be applied to the terminals a and b ? ◻ V (b) For the voltage determined in part (a), what is the power delivered to each resistor? resistor on the left ◻ W resistor at the top of the loop ◻ W resistor at the bottom of the loop ◻ W (c) What is the total power delivered to the combination of resistors? ◻ W

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

Three resistors with resistances R1 = R/2 and R2 = R3 = R are connected as shown, and a potential difference of 265 V is applied across terminals a and b (see figure below). (a) If the resistor R1 dissipates 88.0 W of power, what is the value of R? Ω (b) What is the total power supplied to the circuit by the emf? W (c) What is the potential difference across each of the three resistors? ΔV1 = V ΔV2 = V ΔV3 = V
Solution
0 0

Q2. Consider the amplifier shown in Fig. Q2. The npn bipolar junction transistor has the following parameter values: β = 100, VA = 100 V. Fig. Q2 (a) For the maximum power transfer to load, RL, what should Rout be? [ Ans: Rout = 100 Ω] (b) To have the desired Rout of part (a), what should the specified gm, Q1 be? (You may need to make some assumption for resistors R1, R2 and RE ) [Ans: gm,Q1 = 10 mA/V] (c) What is the amplifier configuration? Sketch the equivalent 2-port network of the amplifier circuit in Fig. Q2. (d) Set R1 = 100 kΩ and RE = 5 kΩ, calculate R2 to complete the design. [Ans: R2 = 64 kΩ] (e) Calculate the input resistance of the amplifier, Rin. [ Ans: Rin≈13.2 kΩ] (f) Calculate the voltage gain vout /vs. [ Ans: vout/vs ≈ 0.49]

Solution
0 0

To improve the performance of the differential amplifier shown in Figure Q1, the biasing current source is replaced by a Widlar current source. The collector resistors are replaced by a current mirror formed by the matched bipolar transistors Qs and Q6, and the bipolar transistors Q1 and Q2 are replaced by the matched field-effect transistors M1 and M2. A single-sided output at the drain terminal of M2 is used. The transistor parameters for the bipolar transistors are: β = 100, VBE (on) = VEB(on) = 0.7 V, and VA = 100 V. The transistor parameters for M1 and M2 are: Kn = 0.15 mA/V2, VT N = 0.8 V, λ = 0.01 V-1 . The improved differential amplifier is shown in Figure Q2. (a) Determine the quiescent voltages and currents of M1 and M2 when v1 = v2 = 0. (4 marks) (b) Design the value of resistor RE such that IQ = 0.1 mA. (2 marks) (c) Determine the maximum and minimum common-mode voltages that can be applied to v1 and v2. (3 marks) (d) Determine the percentage change in IQ when the common-mode voltage applied to v1 and v2 changes from the maximum to the minimum value obtained in part (c). (5 marks) (c) Define vd = v1 - v2, determine the differential-mode voltage gain Ad of the improved differential amplifier.
Solution
0 0