Question

Notify Me Bookmark

When an inductor is connected to a 60.0 Hz source it has an inductive reactance of 59.8 Ω. Determine the maximum current in the inductor (in A) if it is connected to a 48.0 Hz source that produces a 120 V rms voltage. A

When an inductor is connected to a 60.0 Hz source it has an inductive reactance of 59.8 Ω. Determine the maximum current in the inductor (in A) if it is connected to a 48.0 Hz source that produces a 120 V rms voltage. A

Image text
When an inductor is connected to a 60.0 H z source it has an inductive reactance of 59.8 Ω . Determine the maximum current in the inductor (in A) if it is connected to a 48.0 H z source that produces a 120 V rms voltage. ◻ A

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Doubtrix Logo

Problem is not yet solved!

Click on Notify me to get email when question is answered.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Notify me Login Sign Up

Similar/Related Questions

A 46.0-mH inductor is connected to a North American electrical outlet ( ΔVrms = 120 V, f = 60.0 Hz). Assuming the energy stored in the inductor is zero at t = 0, determine the energy stored at t = 1 175 s.
Solution
0 0

A 1.23−mF capacitor is connected to a North American electrical outlet (ΔVrms = 120 V, f = 60.0 Hz). Assuming the energy stored in the capacitor is zero at t = 0, determine the magnitude of the current in the wires at t = 1 170 s. A

Solution
0 0

Consider the CMOS logic circuit shown in Fig. P9.7, which is a simple domino circuit. Node X is connected to a CMOS inverter so that the output of the inverter can be directly fed to the next stage of the domino circuit. a. Explain how the voltage level at node X, after it is precharged to 1.2 V, can be affected by the charge sharing between node X and node Y if their node capacitances are the same. Express the final voltage at node X in terms of the initial voltage at node Y when the charge sharing is completed, following the full precharge operation when the gate terminal of transistor M2 is fixed at 0 V. b. Determine the ratio between device transconductance parameters, kp and kn, of the inverter to prevent any logic error due to charge sharing between nodes X and Y under all circumstances. Assume that the magnitudes of threshold voltages in the inverter are equal to 0.45 V. The use of Level 1 transistor current equations is deemed adequate.

Consider the CMOS logic circuit shown in Fig. P9.7, which is a simple domino circuit. Node X is connected to a CMOS inverter so that the output of the inverter can be directly fed to the next stage of the domino circuit. a. Explain how the voltage level at node X, after it is precharged to 1.2 V, can be affected by the charge sharing between node X and node Y if their node capacitances are the same. Express the final voltage at node X in terms of the initial voltage at node Y when the charge sharing is completed, following the full precharge operation when the gate terminal of transistor M2 is fixed at 0 V. b. Determine the ratio between device transconductance parameters, kp and kn, of the inverter to prevent any logic error due to charge sharing between nodes X and Y under all circumstances. Assume that the magnitudes of threshold voltages in the inverter are equal to 0.45 V. The use of Level 1 transistor current equations is deemed adequate.

Solution
0 0