Question

Notify Me Bookmark

Pseudo NMOS reference inverter design in figure with C = 5 pF, VDD = 2.5 V, K

Pseudo NMOS reference inverter design in figure with C = 5 pF, VDD = 2.5 V, K

Image text
Pseudo NMOS reference inverter design in figure with C = 5 pF, VDD = 2.5 V, K

Detailed Answer

0 0

Please enter your email here. You will get email when this question is answered by our tutor.

Answer
Doubtrix Logo

This Problem has been solved!

You'll get a detailed, step-by-step and expert verified solution.

Join Doubtrix with 7-days free trial

  • Icon Correct & Verified Answers
  • Icon No AI-Generated Answers
  • Icon Video Solution for Difficult Questions
  • Icon Work With Experts to Reach at Correct Answers
Login Sign Up

Similar/Related Questions

Design the Pseudo NMOS inverter in Figure Q3 with ID = 100 uA and VL = 0.2 V. State any assumptions made. Assume the following parameters: Supply voltage VDD = 2.5 V, Transconductance parameter (N) K'N = 100 uA/V2 Transconductance parameter (P) K
Solution
0 0

A three-input CMOS NAND gate is designed as shown below. Assume that VDD=1.2 V, K'n = 90 uA/V2, Vtn = 0.4 V, K'p = 50 uA/V2, and Vtp=-0.5 V in the 100nm technology node. Determine the width of NMOS and PMOS transistors in this NAND gate, such that the worst case delay becomes equivalent to a referenced inverter with Wn=1um and Wp=2um. For the device sizes found in part (a), determine the switching threshold voltage, VM, when all inputs are tied together. Find the maximum IDD current for this NAND gate.
Solution
5 0

In the dynamic logic circuit shown below, all the transistors have the minimum channel length, and their sizes (widths) are marked. The inverter at the output is a standard static CMOS inverter with a PMOS size of 2 and an NMOS size of 1 . For a unit-sized NMOS or PMOS transistor, the intrinsic capacitance at its drain or source terminal is CD, and the capacitance at its gate is CG. For unit-sized NMOS and PMOS transistors, their onresistances are RN and RP, respectively. CD = CG = 1 fF and RP = 2 RN = 2 kΩ. (a) Express y as a Boolean function of the inputs A, B, C and D in the evaluation phase (CLK = 1). (b) Find the capacitances at nodes y, a, b and c, respectively. (c) Let A = B = D = 1 and C = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase (CLK = 0). Estimate the time it takes for the voltage at y to decrease from VDD to VDD/2 in the evaluation phase. (d) Repeat (c) if nodes a, b and c are at VDD in the pre-charge phase. (e) If the inputs are C = 1 and A = B = D = 0 and suppose nodes a, b and c are at 0 V in the pre-charge phase. Considering the charge sharing effect, what is the voltage at node y in the evaluation phase? It is known VDD = 2.5 V, VTN = 0.5 V and the body effect of the transistors can be ignored.

Solution
0 0